↧
Re: Windows Insider 19536 update fails - unable to change SCSI driver to PVSCSI
↧
Re: VMWare won't install OS X from installer from Network drive
Hi,
If you are still receiving the error it maybe that the network adapter is enabled which is updating the date to today's date. When the network adapter is connected it changes the date back to today's date.
Steps:
1. Uncheck "Connected" under "Network Adapter"
2. Open terminal and enter "date 121100002018"
3. Close terminal.
4. Now install the OS.
5. Check "Connected" under "Network Adapter"
↧
↧
Re: vSAN test
Hi Andre,
Let me check I will get back to you.
↧
Getting VsphereVM name
Is there any better way to get the vsphereVM name. I am following the below approach,
$vmrdweb = Get-vspherevmname -vmname $Rdwebname -org $NewOrg.Name -vapp $vapp.Name -CIServer $global:DefaultCIServers.Name -CISessionId $global:DefaultCIServers.sessionid -VIserver $global:DefaultVIServer.Name -VIsessionid $global:DefaultVIServer.SessionId
Inside the Get-vspherevmname function , I have written below block of code,
Set-PowerCLIConfiguration -DisplayDeprecationWarnings $false -Confirm:$false | Out-Null
$ciconnect = Connect-CIServer -Server $ciserver -Session $cisessionid
do { $vma = Get-CIVM -Org $org -VApp $vapp -Name $vmname
Start-Sleep -Seconds $3Seconds
$vmconf = $vma.ExtensionData
$vmtype = $vma.ExtensionData.Type
$vma = Get-CIVM -Org $org -VApp $vapp -Name $vmname
Start-Sleep -Seconds $5Seconds
$vmConfUri = $vma.ExtensionData.Href
$webclient = New-Object system.net.webclient -ErrorAction stop
$webclient.Headers.Add('x-vcloud-authorization',$vmConf.Client.SessionKey)
Start-Sleep -Seconds $3Seconds
$webclient.Headers.Add('accept',$vmType + ";version=$($APIVersion)")
Start-Sleep -Seconds 15
[xml]$vmConfXML = $webclient.DownloadString($vmConfUri)
This approach seems to be failing as it takes longer in generating Uri and it fails to extract the vm name. Is there any better approach ?
↧
unable to change Identity source to ldaps
I am trying to chage y identity source to ad over ldap using ldaps to my dc but I keep geting the error
Check the network settings and make sure you have netwok access to the idenity source
any idea?
↧
↧
Re: VMware Workstation failed to start the VMware Authorization Service.
This is an old thread, I know.
FWIW and should other users run into the same problems some time in future, I'd still like to add my comments.
Up front there is an important thing to note.
I always use the two small batch files on my desktop: 1st one launches VMware Workstation, the 2nd one exits/closes VMware Workstation,
There is also a direct shortcut to vmware.exe on my desktop (I should and will remove that)
Today I coincidentally tried to launch VMware Workstation using the direct shortcut (to vmware.exe) and indeed also got this error.
("VMware Workstation failed to start the VMware Authorization Service. You can try manually starting the VMware Authorization Service.
If this problem persists, contact VMware support.")
So I searched for a solution here and it seems that I should repair/re-install the application...
I then noticed I used the wrong button to launch VMware and launched it using the batch file. That went fine!
One might consider using batch files.
Batch files are located with the VMware Workstation folder and a shortcut to desktop
start_vmware.bat
sc config VMUSBArbService start= demand
net start VMUSBArbService
sc config VMAuthdService start= demand
net start VMAuthdService
sc config VMwareHostd start= demand
net start VMwareHostd
sc config VMnetDHCP start= demand
net start VMnetDHCP
sc config "VMware NAT Service" start= demand
net start "VMware NAT Service"
netsh interface set interface "VMware Network Adapter VMnet1" ENABLED
netsh interface set interface "VMware Network Adapter VMnet8" ENABLED
d:
cd VMware
start vmware.exe
(note: d: and cd VMware : in my case VMware Workstation is installed in d:\vmware, so adjust this to your own situation)
stop_vmware.bat
taskkill /F /IM "vmware-tray.exe"
net stop VMwareHostd
sc config VMwareHostd start= disabled
net stop VMUSBArbService
sc config VMUSBArbService start= disabled
net stop VMAuthdService
sc config VMAuthdService start= disabled
net stop VMnetDHCP
sc config VMnetDHCP start= disabled
net stop "VMware NAT Service"
sc config "VMware NAT Service" start= disabled
netsh interface set interface "VMware Network Adapter VMnet1" DISABLED
netsh interface set interface "VMware Network Adapter VMnet8" DISABLED
(note: the stop_vmware.bat is to stop all vmware processes)
please also see disable auto-start VM workstation services/processes
Set the batch file to run as administrator.
This has been working fine for years.
Again, just FWIW
-
↧
Re: NCP nsx_node_agent crashing on startup
It's there anybody who knows?
↧
How EdbMails supports for Office 365 tenant to tenant migrations?
You have asked the most worthy question and refer this section completely to find an answer to this question. If you are tired by finding best Office 365 migration tool I’ll explain how you can get the result for your business using third party tool.
Most of the Office 365 migration experts prefer to use the third party tool rather than manual methods because there might be more chances of getting failure and data loss.
The good news is that there are many tools available to perform office 365 tenant to tenant migration but here I’ll recommend you to go for most advanced EdbMails Office 365 migration tool. Do you know why?
So let’s get started with the EdbMails Office 365 tenant to tenant migrations
Consider the fact that the EdbMails Office 365 migration tool is most professional tool and one can perform the migration in easiest and quickest way and the application become more powerful and easier than even before to perform the migration from Office 365/Live Exchange server. So pair your Office 365 business with highly optimized Office 365 migration tool for getting Expected result with complete protection of source data.
Now have a look on scenarios supported by EdbMails for Office 365 migration
Scenarios supported by the EdbMails Office 365 tenant to tenant migration are
- Office 365 source tenant to target tenant migration
- Office 365 source to Exchange 2019, 2016, 2013, 2010, 2007 target migration
- Office 365 public folder source to Exchange/Office 365 public folder[target]migration
- Office 365 archive mailbox source to Exchange/Office 365 in place archive target migration
- Office 365 public folder source to Exchange/Office 365 target shared mailbox migration
- Archive/export office 365 tenant to Outlook PST
So do the right things with EdbMails Office 365 migration software because the software will save your money and time.
↧
Re: Esxi host does not respond to ping
Scenario1: Change the DNS suffix and add another domain name that is not a public registered domain name. Using words like .internal or .local . Also, you must add this suffix name to your client to resolve the ESXi host's name (easy way)
Scenario2: Install a local DNS server that is responding to the home.com in your local network (better way)
Scenario3: Add the FQDN of your ESXi host and its IP address to the c:\windows\system32\drivers\etc\hosts in your client system (dummy way)
↧
↧
Re: Getting VsphereVM name
Moderator: Moved to PowerCLI
↧
Re: Esxi Crash After Turn On VMs
What is the exact VM settings? CPU, Memory ... Does it happen for the new VMs or existing ones?
Can you check if you start a VM without a vDisk and then add a VMDK to it in power-on mode, PSOD of ESXi will happen again or not?!
↧
Re: How best to upgrade my storage on ESXi 6.5
In option1, If you mean to add the 4TB, I think it's the best way that has fewer risks of data loss. Only you should know the VM does not need to know where is its datastore! you must move it from the old 1TB datastore to the new 4TB and start it again. Just with respect to the Guest OS, if the volume of VM is running low, you need to increase VMDK size and then extend it in the guest OS.
Option 3 is the second-best way but it's better to use the SSD disk as the host cache and repository of VM swap files.
Option 2 is the new installation method and depends on your IT infrastructure situation (I really prefer to NOT choose it)
Option 4 needs to more moving operations, so there are more risks of losing data!
↧
Re: unable to change Identity source to ldaps
Is your DNS infrastructure (AD-Integrated) working correctly? Can you resolve the domain name from another system (for example your client system) without any problem? regardless of the vCenter server identity source settings, please check the domain service working correctly ...
At last check the domain controller's firewall setting! (TCP port 389 must be reachable)
↧
↧
horizon7.3.2中使用 7.10代理可能会有些什么问题？
horizon7.3.2中使用 7.10代理可能会有些什么问题？
↧
Re: ESX Host Shutdown auditing
By investigation of exactly log files, you have more details about everything that happened into your ESXi host.
↧
Re: Getting VsphereVM name
Doesn't the following return the vSphere VM name?
Get-CIVM -Org $org-VApp $vapp-Name $vmname|
Get-VM|
Select -ExpandProperty Name
↧
Re: Vmware horizon client错误:无法连接服务器:
你有错误图片吗？服务器可以ping通吗？
↧
↧
Re: How best to upgrade my storage on ESXi 6.5
For the best long term performance I would install ESXi on the 120GB SSD. So remove the 1TB disk from your server, install the SSD and then install ESXi on that disk. Then add the 1TB and the 4 TB disks to the server. You should be able to see the VMDK files from your VM on the 1TB disk. Copy those files to the 4TB disk and import the VM from that location. As long as you don't touch that 1TB disk you could always go back to the original situation.
↧
Re: vCenter registration of the VASA provider failed.
А какой сертификат выдает URL https://192.168.121.126:9083/version.xml ?
↧
Re: After ESX Host Crash Virtual Machines are in disconnected state
thank you for your answer.
all vms are on an netapp Shared Storage and all host are possible to use the storage
actually i'm not possible to remove the vms from the inventory it is greyed out.
on the crashed host i can only remove from from the inventory, but i don't now if this is the correct way
↧